User Manual

63
9. pARAMETER MENU
When the MICROBEAST is ready, hold down the button until the Menu LED next to point A ashes
quickly and then release the button. This is how to enter the parameter menu.
To switch to the next parameter menu point, just briey press the button once again. After the last
menu point pressing the button one time more exits the parameter menu and the MICROBEAST is
ready for ight again. Status-LED will indicate the tail gyro mode and the LEDs A - N are o.
Single menu points can be skipped without performing any changes. Therefore don‘t move any stick
while you are at the menu point you want to skip and just press the button shortly once again. The
parameter menu has only eight points A to H, after point H you exit the parameter menu and the
MICROBEAST returns to ight mode.
Never attempt to y when the MICROBEAST is in one of the menus!
In this condition the control system and sometimes the stick inputs are deactivated!