User Manual
58
N Setting the pirouette optimization direction
When entering setup menu point N the swashplate will tilt forwards or backwards depending on
your helicopter‘s setup (servos, linkages,…) this resulting tilt will correspond into a specific com-
pass heading.
Now grab your helicopter at the rotor head and rotate it on the vertical (yaw) axis by hand. The swash-
plate must continue to maintain the same compass heading (see g. 32 on the next page). The initial
direction (forward or backward) is irrelevant.
If the noted swashplate tilt opposes the rotation of the helicopter and rotates against the direction of
the model the pirouette optimization should be invert. This can be done by moving the tail stick in one
direction. For conrmation the color of the Status-LED on the MICROBEAST will change:
Status-LED Pirouette optimization direction
red normal *
blue reversed
Now the initial setup of the MICROBEAST is nished. When you press the button now you will
exit the setup menu and the MICROBEAST is ready for operation.
*
Factory Setting