User Manual
49
H Swashplate mixer
At setup menu point H you can choose the electronic swashplate mixer your helicopter requires or choose
“mechanical“ for switching of the electronic swashplate mixer if your helicopter has a mechanical mixer. For
the electronic mixer, the MICROBEAST supports 90°, 120° and 140° swashplates. Besides these choices, you
can set any swashplate geometry with the PC software and “mechanical“ for switching o the “electronic
swashplate mixer” option.
Which kind of CCPM your helicopter uses can be read in the manual for your helicopter.
The color and state of the Status-LED shows the currently selected mixing type:
Status-LED:
o purple red ashing red blue ashing blue
swashplate mixer user dened mechanical 90° 120° * 140° 140° (1=1)
If your helicopter requires an electronic swashplate mixer by no means use your
transmitter‘s swashplate mixer function!
The mixing is all done by the MICROBEAST. Deactivate the swashplate mixing in your transmitter or
program it to mechanical mixing often called “H1“ or ”1 servo“ even if your helicopter requires
electronic mixing (also see section 3.2).
Push the button to save the conguration and to proceed to setup menu point I.
*
Factory Setting
user dened mechanical 90° 120° 140° 140° (1=1)
Fig. 27