User Manual

Now adjust the linkage rods according to your helicopter manual. The swashplate should now be at the

midpoint and perpendicular to the main shaft and the rotor blades should have 0 degrees of pitch.

Always work this out from bottom (servos) to top (blade grips).

Also level and phase the swashplate driver in the correct way.

At 0 degrees of pitch the swash driver arms must be horizontal and the linkage balls of the blade grips

have to be perpendicular to the spindle shaft.

Push the button to save the conguration and to proceed to setup menu point H.

Fig. 26

Fig. 25