User Manual
44
Then adjust the servo limit for the other direction. Drive the tail pitch slider by using the tail stick to the other
maximum endpoint and then release the tail stick. After a short moment, the color of the Status-LED should
start ashing followed by lightning steady purple, (mix of red and blue) indicating that the servo endpoint
adjustment is complete.
Fig. 23
Status-LED: red or blue
Status-LED: purple
If the Status-LED does not light or lights in an unexpected color, the servo throw is obviously
too small. In this case mount the linkage ball of the tail linkage rod further inward on the servo horn.
This ensures that the tail gyro of the MICROBEAST will perform in the best way and that enough
servo resolution is available.
Push the button to save the conguration and to proceed to setup menu point F.