User Manual

If you have moved the wrong stick/switch, you can reactivate the correct function again. The MICROBEAST

remembers only the last function that was operated and conrms it with blue ashing of the Status-LED.

Press the button after learning each function to save the assignment and to go to the next function. The

button remains locked until you operate a new control function. You have to assign every function with

the exception of the last auxiliary channel CH6 (this channel can be skipped by pressing the button without

learning the function).

Once a channel is assigned, it is no longer available and is ignored by the MICROBEAST for the

remaining process. Thus, after learning of the pitch function (menu point B) you can enable the throttle

function (remove throttle hold and switch to a linear or V shape curve) and teach the throttle channel by

re-operating the collective stick (menu point G). The pitch channel is now no longer considered, as this

channel has already been assigned previously!

Receiver menu point Function

pitch

aileron

elevator

rudder

tail gyro gain

throttle (CH5)

auxiliary (CH6)