User Manual

11
Spektrum Adapter
3. MOUNTING AND CONNECTION
3.1 Mounting the MICROBEAST unit
Attach the MICROBEAST unit by using one of the provided gyropads at a
preferably low vibrating position on your helicopter such as the gyro platform or
receiver platform. You may also need to choose another type of mounting pad
depending on the vibration pattern of your helicopter. Ask you MICROBEAST
dealer.
The MICROBEAST unit can be attached at or upright, and even upside down
under the helicopter. However, the servo connector pins must always point
toward the front (or rear) of the helicopter.
Pay attention that the edges of the MICROBEAST unit are all parallel with the
corresponding axes of the helicopter! And be sure that the mounting platform is perpendicular to
the main shaft!
Longitudinal
axis
Connectors parallel
to the longitudinal axis
Fig. 1
Fig. 2