User Manual

Managing Robots
Servi Plus User Manual |
35
○
Sensors
Fingerprints or foreign substances on the sensor should be removed using
a microber cloth and glass cleaner. Foreign matters on the surface may
cause malfunction of the product. Wipe it again with a dry microber cloth
at the end to make sure you don’t leave any smudges behind, then shine
your phone’s ash sideways to see if any spots remain.
○
Wheels
Caution
Make sure to turn off the robot before cleaning the wheels.
Remove the wheel covers and use a long brush to remove any debris or
dust. When cleaning the wheels, gently wipe them with a damp towel.
Refer to the image below for how to remove the wheel cover.
1.
The center line of the wheel leads to the robot main body. Turn the
wheel cover to the left from the center line.