User Manual

How to Use
Servi Plus User Manual |
22
Bussing
This is the Robot Workflow screen with default bussing mode.
○
Service Mode > Station
The robot will move to a pre-dened station whenever it completes bussing.
○
Thank you Message
You can turn Thank you Message
ON
/
OFF
.
The voice prompt occurs irrespective of this setting (whether
ON
or
OFF
),
when the robot detects weight on the tray. (Voice prompt:
Thank you.
)
○
Station At
This feature designates specic points to be used as stations.
Caution
If
Station At
is set to
Manual
, the set points are not used.
y
To use the station, press the
Change
button and set Station At.
y
When you complete Station At and move to the home screen, the station
is displayed.
y
When a destination is selected, the station is entered as the last point.
○
Full Tray > ON
The robot returns to the Return To location if it detects something with the
weight sensor of more than 22 lb (10 kg) while bussing.
○
Timer > OFF
Dene how long the robot stays at a destination. When it is set to
OFF
, the
robot will stay at the destination until the tray is full while bussing. The
Skip
button allows the robot to move or return to the next location.