User Manual

How to Use
Servi Plus User Manual |
20
y
Station At
It is displayed when the user select the bussing type and then a station in
service mode. You can specify Return To.
y
Return To
To change Return To to the other position, press
Change
and select a
saved destination.
y
Empty Tray
If it is turned
ON
, the robot starts the next delivery when the tray is
unloaded.
y
Full Tray
The bussing type is changed from
Empty Tray
to
Full Tray
.
y
Timer
The timer denes how long the robot stays at a destination. To enable the
timer, press
ON
and set Return After. You can turn it off by switching it to
OFF
.
y
Return After
The robot starts moving to the next destination after the designated
Return After, which can be set using the timer.
Using Robot Workow
Serving
For information on features of Robot Workflow, refer to Page 19.
○
Tray Selection OFF
The default Robot Workow screen. Enter the destination and press the
GO
button.