User Manual

How to Use

Servi Plus User Manual |

Using Servi Plus

Preparing for Use

To use the robot, you must have registered the robot and completed the

mapping process by following the touch screen instructions.

Bear Robotics offers a cloud-based service that includes robot monitoring, robot

workflow, robot guide and troubleshooting measures anytime, anywhere.

In order to install the robot, you will need to sign up for the Universe, the Servi

management system. Please contact Bear Robotics, for the sign-up process.

https://universe.bearrobotics.ai/

Robot Initial Setting

To use the robot, you must register your robot and perform a mapping process.

Please complete the initial setup by following the touch screen instructions.

○

Step 1. Register a Robot

Turn on the robot and register it by following the touch screen instructions.

Create a location in Universe and complete registration by entering the

4-digit code displayed on the touch screen.

○

Step 2. Start Mapping

Drive the robot around by following the touch screen instructions to allow it to

map the oor with its cameras and LiDAR. Below is the mapping sequence.

You can add destinations on the touch screen or in Universe.

Caution

Place the robot towards a wall before pressing the

Start mapping

button. If the wall

is transparent or the robot starts from other location, the resulting map image may

have distortions.