User's Guide

AT commands Networking and security commands
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
77
Bit Meaning Setting Description
0 Allow PanId
reassignment
0 Only associates with Coordinator operating on PAN ID that
matches device ID.
1 May associate with Coordinator operating on any PAN ID.
1 Allow Channel
reassignment
0
Only associates with Coordinator operating on matching CH
channel setting.
1 May associate with Coordinator operating on any channel.
2
Auto Associate
0 Device will not attempt association.
1 Device attempts association until success.
3 Poll coordinator on pin
wake
0 Pin Wake does not poll the Coordinator for indirect (pending)
data.
1 Pin Wake sends Poll Request to Coordinator to extract any
pending data.
4 -
7
Reserved
Default
0
A2 (Coordinator Association)
Sets or displays the Coordinator association options.
Parameter range
0 - 7 (bit field)
Bit field:
Bit Meaning Setting Description
0
Allow Pan ID
reassignment
0 Coordinator will not perform Active Scan to locate available PAN ID.
It operates on ID (PAN ID).
1
Coordinator performs an Active Scan to determine an available ID
(PAN ID). If a PAN ID conflict is found, the ID parameter will change.
1
Allow Channel
reassignment
0
Coordinator will not perform Energy Scan to determine free channel.
It operates on the channel determined by the CH parameter.
1 Coordinator performs an Energy Scan to find the quietest channel,
then operates on that channel.
2
Allow
Association
0 Coordinator will not allow any devices to associate to it.
1 Coordinator allows devices to associate to it.
3 -
7
Reserved