Owner's Guide

Can I use just one earbud?
You can use just the left or right earbud. Remove the earbud you want
to use and pair it with your device. If you’ve already connected to your
device, you will see “Wayl Bean X” in your Bluetooth settings. If you see a
new “Wayl Bean X” ready to connect, this would be the other earbud not
yet paired. You will see that earbud that is out of the case flashing
red-blue lights which means it’s ready to connect to your device. Once
you connect to your device you can play audio in just that earbud. The
other earbud should remain in the charging case.
I can’t connect to a new/other devices.
Please check that you have disconnected from the previously used
device and all devices. You can only connect to one device at a time. If
you are unsure about your connection status, you can always reset your
earbuds connection (see page 10).
The earbuds are not fully fitting in the charging case.
Remove the earbud from the charging case and check the back of the
silicone loop on the earbud(s) to make sure it’s angled correctly (see
page 13) and is also correctly placed on the earbuds. Adjust accordingly
and place back in the charging case. Repeat above until it fits back in the
case (you will see solid red indicator lights on the earbud). If you don’t
see any lights make sure the charging case is charged.
32