S1, S1C & S1 PLUS Smart Watch USER GUIDE 1 doc: MW10GB8
TABLE OF CONTENTS Smart Phone Compatibility ---------------- 3 What's Included ------------------------------- 3 Power and Sleep Functions ---------------- 4 Navigating S1 Watch ----------------------- 4 Important - SYNC Procedure -------------- 4 Charging Watch ------------------------------- 16 Managing Audio ------------------------------- 17 Operation with Bluetooth Speaker -------- 20 Frequently Asked Questions ---------------- 22 IMPORTANT Please charge your watch fully before using.
SMART PHONE COMPATIBILITY Beantech Watches are designed to work with either iPhone or Android phones. iPhone - S1 watch will interface with iOS 7.1 or higher and model 5S or newer. To determine your phone's software version, go to Settings > General > About. Android phones - S1 watch will interface with Android 4.4 or higher. To check you Android version, go to Settings > About Device.
NAVIGATING S1 Apps on the S1 watch are arranged by category into a series of screens. Each Apps screen contains 3-4 Apps. While viewing clock, Swipe left or right, or up or down to access Apps screens. Swipe left or right to change Apps screens. Within Apps, swipe to the directions of arrows to access various levels. To return to clock, swipe up or down. Exit apps back to Apps screens by swiping right to left. IMPORTANT - SYNC PROCEDURE 1. First, Bluetooth SYNC S1 watch with your smart phone.
STEP 2 On the watch, open the Settings App. Then turn POWER & VISIBILITY both to ON. Note: For most Android devices you will need to pair through the BT connection APP on the watch. Open BT connection APP and tap Search for new device. Select your phone when it appears, then accept the sync on your phone.
APP SYNC FOR iPHONE STEP 1 iOS DOWNLOAD BEANTECH WATCH APP Search for "Beantech Watch" in the Apple App Store, then download to your phone.
STEP 3 iOS APP REGISTRATION & LOG IN SCREEN Tap "REGISTER" Tap Login if you are a current user.
STEP 5 iOS LOGIN CONFIRMATION MESSAGE Select STEP 6 iOS SYNC APP TO PHONE to start APP SYNC Tap here 8
STEP 7 iOS Tap here to search for S1 (on the PLUS symbol) Then tap "S1" when it appears The APP will open and announce a Bluetooth Pairing Request Select "Pair" to pair the APP 9
STEP 8 iOS Now you may choose to Sync your phone contacts to your watch. Turn Sync Contacts ON to allow. From the bluetooth screen of your iPhone, tap the "i" on the top S1 listing, which represents the sync to your watch. Note two pairings for S1 watch, one for the watch and one for the APP. Then, turn "Sync Contacts" ON. Note: if your iOS is prior to 11.0, you will be asked to sync contacts during the watch sync process.
APP SYNC FOR ANDROID PHONE STEP 1 ANDROID Download Beantech Watch app from Google Play Store Open the app and Tap here STEP 2 ANDROID APP REGISTRATION & LOGIN SCREEN Tap "REGISTER" Tap Login if you are a current User 11
STEP 3 ANDROID REGISTRATION Enter email and password, then tap "ENTER" Note: password must consist of letters and numbers only and must be at least 6 characters long. STEP 4 ANDROID ENABLE NOTIFICATION Tap "OK" to enable your phone to send notifications to your watch.
STEP 5 ANDROID NOTIFICATION ACCESS Turn "Beantech Watch ON.
STEP 7 ANDROID This screen will appear.
INPUT PERSONAL DATA First select from Metric of Imperial (US Standard) format. On the watch, go to Settings > Units, then select Metric or Imperial. Next enter the Pedometer app on the watch and select Options. Enter your daily goal, height and weight. Tap √ after each entry. The app will auto update this at next use. Note: Personal Data in Imperial format will be a close approximation. This will not affect your history or statistics. IMPORTANT NOTES 1.
CHARGING S1 WATCH Back of Watch Watch Cradle USB AC Adapter To charge, placed the watch into the cradle and make sure the contacts on the back of the watch align with the contacts in the cradle. Connect the Large end of the USB charging cable to the AC Adapter, and the small end into the port on the cradle. Plug the AC adapter into an AC outlet. Note: for portable convenience, S1 Watch can charge from a powered USB port without the use of the AC Adapter.
MANAGING AUDIO WITH PHONE CALLS When making or receiving phone calls you may choose to direct the audio to your phone or to S1 watch. Answer and place phone calls from S1 watch. Android To receive the call on watch: 1. Go to bluetooth settings in your phone for the S1 watch and turn Call Audio and Media Audio both on. To receive calls on the phone: 1. Option one is to turn off bluetooth on the phone. 2.
Then select where you want the audio to go through. You can perform this action with each call. Tap to make your selection You can also select for permanent call direction as follows: 1. Swipe up from the bottom edge of the screen to reveal quick access menu. 2. Then hard press and hold the Music Control Panel until it enlarges to reveal more controls.
On the Music Control menu, tap the up arrow at the top right of the menu to open choices for audio control. Tap here Tap here Select iPhone, Speaker or S1. Note if you select iPhone you may choose from speaker or connected devices such as headphones from the call screen during a call. Select iPhone or S1 watch. Note if you select iPhone you may choose from speaker or connected devices such as headphones from the call screen during a call.
OPERATION WITH BLUETOOTH SPEAKERS (FOR S1 PLUS ONLY) S1 PLUS Smart Watch can interface through bluetooth headphones / speakers giving added convenience and benefit. S1 PLUS can watch can connect from the watch directly to an external bluetooth device such as bluetooth speakers or headphones. This allows you to play music loaded on the watch while away from your phone. S1 PLUS can also play music loaded on your phone through bluetooth speakers / headphones.
Tap to enter 5. Then select Search for New Device. The bluetooth speaker will appear, then select it.
CONNECT TO BLUETOOTH DEVICE THROUGH PHONE This allows you to direct audio from all phone connected applications to the wireless speaker / headphones. With this connection you can direct the audio for functions such as making phone calls or listening to music loaded on your phone through the wireless bluetooth speakers / headphones. 1. IMPORTANT: Make sure watch is connected to phone first. 2. Now pair the bluetooth speakers / headphones as outlined in the previous section.
6. How to change audio volume of S1 smart watch? Go to Settings > Volume > Multimedia, then either increase or decrease. 7. How to turn S1 display ON by moving your wrist? Go to Settings > Motion, then select from available options. 8. How to synch time on S1 smart phone? Go to Beantech Watch App on smart phone. Make sure Bluetooth is connected from the S1 to the App. From the App Home Page, tap sync data icon in upper right corner. 9. I'm not getting texts on the watch.
