User guide

SHOUT ts User’s Manual Version 1.0.1

| Appendix B: Upgrading the Firmware

The SHOUT ts firmware can be upgraded using a PC connected to the USB port of

the device. The device drivers support Windows XP, Windows Vista and Windows

1. Run the NAL USB Bootloader program.

2. With a USB cable attached to a computer and the device, press the

“Start Flash Mode” button.

3. Wait until it activates and then press the "Open Hex File" button.

4. Browse and select a valid NAL device BIN file. NAL Research makes the

BIN file available upon request.

5. Once the BIN file is loaded, press the "Program/Verify" button.

6. Wait for the programming to complete.

7. Press the "Reset Device" button.

8. The new firmware is now loaded on the device..