User manual

28
Mute & Earpiece-Jack Mode
Mute functionality
The mute function of the IntelliDOCK allows the user to mute the uplink
(Bluetooth®, or Privacy) audio to the 9555 handset whilst docked in the
IntelliDOCK.
1. During a call, Press the Mute
button on the face of the Intel-
liDOCK, a red LED will illuminate at the Mute button to conrm that
the IntelliDOCK is muted.
2. To exit the mute mode, press the mute button once.
Ringer Selection
The IntelliDOCK has an internal ringer that sounds during an incoming
call.
There is a choice of two (2) ring tones:
♦ Repeatingtwo-tonecadence
♦ Singlebeepatbeginningofincomingcall
These modes can be changed by single press of the Ringer
button, when OUT of call. A preview of the sound will be heard, and the
setting is stored. Press again to toggle between the 2 choices.
NOTE:
MutefunctiononlyoperatesDURINGacall.Oncethecallisended,
Mutemodeisexited.
IftheMute
buttonispressedwhenNOTincall,itwillstep
throughtheRingerVolumemodes.