User manual

IntelliDOCK 9555 Installation & User Manual
27
A Bluetooth® Phone Call - Mobile Originating
A Bluetooth® call can be started by using the 9555 keypad.
1. The Bluetooth® connection to the Audio Headset is required [check
the Bluetooth®
LED is on, blue - half intensity].
Dial (using the full country codes) on the 9555 keypad. The
message appears on 9555: “Call In Progress”. Audio is
automatically sent to the Bluetooth® Headset.
During call, the Bluetooth®
LED will ash blue slowly.
2. To end call, use the 9555 keypad.
Options:
1. During call, you may transfer the call to the optional “Privacy
Handset” by taking the Privacy Handset out of its cup. This
automatically directs the call audio to the Privacy Handset. To
return call back to the Bluetooth® Headset, insert the Privacy
Handset back in its cup.
Bluetooth® Phone Call – Mobile Terminating
The Bluetooth® connection to the Audio Headset is required
[check the Bluetooth®
LED is on, Blue - half intensity].
1. Answer the incoming call by:
♦ PresstheBluetooth®headsetanswerbutton,OR:
♦ Pressanswerbuttononthe9555keypad.
2. To end call:
♦ PresstheBluetooth®headsetanswerbutton,OR:
♦ PressEndCallbuttononthe9555keypad.
Privacy Handset Use
The Beam Privacy Handset (RST755) is ordered separately.
The Privacy Handset mode is enabled when the handset is removed
from the cup. Please re-dock the Privacy Handset when not in use.
When the handset is out of its cup, it then has priority and audio is
directed to this handset.
If the Bluetooth® Headset is NOT used, then this Privacy Handset can
be used on its own.