User manual

IntelliDOCK 9555 Installation & User Manual
21
Iridium Antenna connection
The Antenna connections exit from
the rear of the IntelliDOCK cradle, on
foot-long antenna loom.
1. Connect your Iridium antenna
cable to the TNC-Female connector on
the cable coming from the rear of the
IntelliDOCK.
The Iridium antenna cable (outer
screen) is automatically connected to
the GND (0V) of the IntelliDOCK (via the
9555 Phone when the phone is docked).
WARNING:
DO NOT pull with force on the cables from the Rear of the
IntelliDOCK.Provide strainreliefclampingof theantennacables
whererequired.
Correct installation of the antenna system is a vital part of the
IntelliDOCKsystem,to ensurereliablefunctionality,anddrop-free
calls.
Use only quality low-loss antenna cabling, and ensure that the
cable(s)andconnectorstotheantennaprovidenomorethan3dB
attenuation(atfrequencyof1.6GHz)
NOTE:
Refertothesection“AssuringQualityofIridiumService”formore
informationonantennaplacementandinstallation