User manual

IntelliDOCK 9555 Installation & User Manual

Installation Guidelines

This guide outlines the details for installing the Beam IntelliDOCK 9555

in conjunction with an Iridium 9555 Portable Handset.

This kit must not be used with any other device other than the Iridium

9555 Handset.

◊ The units must be protected from dirt and moisture.

◊ Ensure that each mounting surface is strong enough to support

the component being mounted to prevent the component from

loosening over time.

◊ Leave space around the units to allow for cooling.

◊ Select an area to mount components that do not interfere with

driver or passenger seating or leg space.

◊ Ensure that wires or cables are hidden away from the driver or

passenger and do not interfere with seating or leg space.

◊ Mount all components securely to prevent shifting that could cause

injury or could interfere with safe vehicle operation. Always use the

supplied mounting hardware.

◊ The units can be easily removed.

◊ The location allows for adequate clearances for cables

◊ Only qualied personnel should install communication equipment.

If necessary, contact the vehicle manufacturer for air bag

information specic to the vehicle.

Routing Cables (for vehicle installations)

If your vehicle is equipped with wiring troughs in the doorsills, use them

to simplify cable installation and to provide maximum protection for the

cables.

If wiring troughs are not available, route cables according to these

guidelines:

◊ Route cables so they are protected from pinching, sharp edges,

and crushing

WARNING:

Airbagsinatewithgreatforce.DONOTplaceobjects,including

communicationequipment,intheareaovertheairbagorintheair

bagdeploymentarea.Ifthecommunicationequipmentisimproperly

installedandtheairbaginates,seriousinjurycouldresult.

◊ Where possible, avoid routing cables above the catalytic converter

◊ Use grommets wherever a cable must pass through a hole in a

metal panel

◊ In a vehicle equipped with electronically controlled anti-skid brakes,

route all cables on the opposite side of the vehicle from the braking

modulator box to minimize possible interference from the phone.