User manual

SatDOCK 9555 Installation & User Manual
39
DataCommunications
The SatDOCK 9555 provides the convenience of accessing
Iridium data services via the mini-USB connector located on
the bottom of the cradle while the 9555 handset is docked.
You should consult your service provider for full details on the
availability of this service with your account.
Data communication with the 9555 handset provides the
following:
◊ Ability to issue AT commands directly to the 9555
◊ Undertake Circuit Switched Data (CSD), Short Burst Data
(SBD) and Short Message Service (SMS) communication
when services are provisioned.
◊ Access the internet via Iridium Direct Internet 2 or through
a Dial-Up connection
UsingtheUSBDataPort
The Iridium 9555 handset provides a mini-USB port on its side
that allows connection to a PC or laptop for data communication
purpose. For more information on using the 9555 handset’s USB
port, please refer to the 9555 handset user manual.
When the 9555 handset is docked in the SatDOCK 9555 cradle,
its USB data function is available through the mini-USB connector,
on the bottom of the SatDOCK 9555, as shown below.
Mini-USB
Data Port
To connect a PC/laptop to the SatDOCK 9555 bottom mini-
USB port, you will require a mini-USB-B to USB-A data cable.
This cable is included in your original 9555 package.
TIP:
Learn more about Data Services available at:
www.beamcommunications.com
NOTE:
When the 9555 is docked in the SatDOCK 9555 cradle
DO NOT use the USB port on the side of the 9555.
Please use the provided USB port on the underside
bottom of the cradle to ensure correct SatDOCK 9555
synchronization and operation.