User manual

SatDOCK 9555 Installation & User Manual

Earpiece-Jack Mode

The SatDOCK 9555 allows a user to utilise a 2.5mm earpiece

plugged into the right side of the 9555 handset.

1. During a call, to enable Earpiece-Jack Mode, press and

hold the Mute button for 1.5 seconds.

The LED on the mute button will start ashing ORANGE to

indicate that the SatDOCK 9555 is in Earpiece-Jack mode.

2. To exit the Earpiece-Jack Mode, press the Mute button once.

Tracking&AlertOperations

Enable Tracking & Alert

The Tracking & Alert function is not enabled by default and it

has to be congured and enabled using the SDMS software via

the mini-USB connection to the SatDOCK 9555.

Various conguration options are available to the user in the

SDMS. The message delivery method is also set using the

SDMS. Please refer to the SDMS User Guide for more details

on how to congure and enable the Tracking & Alert function

on the SatDOCK 9555.

NOTE:

Any time there is reference to the Track button or the Track

LED it is referring to the button shown below which is the

same button on the front of the SatDOCK 9555.

NOTE 1:

The 2.5mm jack can remain plugged into the 9555

handset whilst in normal or Earpiece-Jack mode.

NOTE 2:

The Earpiece-Jack function only operates DURING

a call. Once the call is ended, the 9555 will exit the

Earpiece Jack mode.

If the Ringer button is pressed when NOT in call, it will

step through the Ringer Volume modes.