User manual

B. During call, you may transfer the call to the optional

Bluetooth® audio headset (if connected) by a single

short press of the Bluetooth® button on the cradle. This

automatically directs the call audio to the Bluetooth®

device. The Bluetooth LED will start slow-ashing in

BLUE to indicate the Bluetooth device is in use. To return

the audio back to the hands-free mode, perform another

single short press of the Bluetooth button on the cradle.

The Bluetooth LED will turn solid BLUE.

Intelligent Handset Phone Call - Mobile Terminating

1. Answer the incoming call by un-cupping the Intelligent

handset from its cup.

2. Press the C {RED} button on the Intelligent handset to

terminate the call.

Once the call is in progress, the same options described

above are available.

Mute&Earpiece-JackMode

Mute functionality

The mute function of the SatDOCK 9555 allows the user to mute

either the Intelligent handset, Bluetooth®, or privacy handset

audio to the 9555 handset whilst docked in the SatDOCK 9555.

1. During a call, Press the Mute button on the face of the

SatDOCK 9555, a RED LED will illuminate the Mute

button to conrm that the SatDOCK 9555 is muted.

2. To exit the mute mode, press the mute button once.

Ringer Selection

The SatDOCK 9555 has an internal ringer that sounds during

an incoming call. Ring can also be directed to the external

speaker. The ring modes can be changed by a press of the

Ringer button, when OUT of call. A preview of the sound will

be heard, and the setting is stored. Continue pressing to switch

between the 5 choices.

♦ Single beep at beginning of incoming call (internal

ringer only)

♦ Repeating two-tone cadence, either internal or

through the speaker.

♦ Repeating three-tone cadence, either internal or

through the speaker.

NOTE:

Mute function only operates DURING a call. Once the call

is ended, Mute mode is exited.

If the Mute button is pressed when NOT in call, it will step

through the Ringer Volume modes.