User manual

SatDOCK 9555 Installation & User Manual
31
PrivacyHandsetUse
Privacy handset Phone Call - Mobile Originating
1. Remove the privacy handset from its cup
2. Dial the phone number (using the full country code) on the
9555 keypad whilst docked. Press the GREEN button
3. A beep sound should be heard from the handset and a
message is displayed on the 9555 to indicate a call is
in progress.
4. Once the call is connected, the Ring/Mute LED will ash
in ORANGE to indicate the privacy handset is in use.
5. Press the RED key on the 9555 handset to terminate the
call.
Privacy Handset Phone Call - Mobile Terminating
1. Answer the incoming call by un-cupping the privacy
handset from its cup.
2. Press the RED button on the DPL handset to terminate
the call.
Intelligent Handset Phone Call - Mobile Originating
1. Remove the Intelligent handset from its cup.
2. Dial the phone number (using the full country code) on the
keypad. Press the OK GREEN key.
3. A beep sound should be heard from the handset to
indicate a call is in progress and the following message
will be displayed on the 9555 handset.
DPL Call in Progress
4. Once the call is connected, the Ring/Mute LED will ash
in ORANGE to indicate the Intelligent handset is in use.
5. Press the RED key on the 9555 handset or the C {RED}
key on the Intelligent handset to terminate the call.
Options:
A. During call, the call audio will be transferred to the hands-
free speaker and microphone if the Intelligent handset
is returned to its cup. The Ring/Mute LED will be turned
off. To return the audio to the Intelligent handset, simply
remove it from its cup.
NOTE:
Any time there is reference to the Ringer/Mute button or the
Ringer/Mute LED it is referring to the button shown below
which is the same button on the front of the SatDOCK 9555.