User manual

SatDOCK 9555 Installation & User Manual

PlacingVoiceCalls

Hands-Free Phone Call – Mobile Originating

1. Dial the number (using the full country codes) on the 9555

handset keypad whilst docked, or the Intelligent handset

keypad (if connected). Press the GREEN key (or OK on

Intelligent handset) to start the connection.

2. Beeps should be heard from the speaker to indicate a call

is in progess. A message will display on the 9555 handset

to indicate the call is progressing.

Options:

A. During the call, you may transfer the call to the optional

privacy handset by taking the privacy handset out of

its cup. This automatically directs the call audio to the

privacy handset. The Ring/Mute LED on the cradle will

start ashing ORANGE to indicate the privacy handset is

being used. To return the call back to hands-free mode,

place the privacy handset back in its cup.

B. During the call, you may transfer the call to the optional

Intelligent handset by taking the Intelligent handset out

of its cup. This automatically directs the call audio to the

Intelligent handset. The Ring/Mute LED on the cradle will

start ashing ORANGE to indicate the Intelligent handset

is being used. To return the call back to hands-free mode,

place the Intelligent handset back in its cup.

Hands-Free Phone Call – Mobile Terminating

Now make a call from your landline phone or mobile phone to

the 9555 handset. You need to know the phone number of the

SIM card used in the 9555 handset.

1. The SatDOCK 9555 internal ringer or the external

speaker will ring according to the ringer setting.

2. Answer the call by pressing the GREEN key on the 9555

handset or the OK key on Intelligent handset (if connected).

Once the call is in progress, options A and B from “Hands-free

Phone Call – Mobile Originating” section are also applicable.

NOTE:

Country codes are not required if “Call Processing” is

enabled in the SDMS