User manual

18
Cradle Mounting
The SatDOCK 9555 is supplied with a universal RAM® mount
bracket that enables mounting to any at surface (vertical or
horizontal) within a vehicle, attached on a wall or on a table as
required.
1. Attach one pivot base to the rear of the SatDOCK 9555
using the M4 screws supplied.
Pivot base bolted on
2. Secure the second pivot base to the location you have
selected for mounting the SatDOCK 9555.
Pivot Base RAM Mount
3. Use the interconnecting stem of the RAM® mount to
secure the SatDOCK 9555 to the pivot base and tighten
into the desired location rmly using the wing nut on the
stem.
Finished result