Technical data
2
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS 3
1. General safety information 4
1.1. Purpose of this manual 4
1.2. Composition of the manual and consultation details 4
1.3. General safety precautions 4
1.4. Identication of the manufacturer 5
1.5. Technical documentation supplied with the BEAM Commercial central vacuum unit 6
1.6. Standard equipment supplied with the BEAM Commercial central vacuum unit 6
1.7. Correct and improper uses 6
2. Technical characteristics 6
2.1. Description of the BEAM Commercial central vacuum unit 6
2.2. Standard models and approximate dimensions 7
2.3. Technical data and characteristics 8
2.4. Frame 9
2.5. Dust container 9
2.6. Central section 9
2.7. Top section 9
2.8. Safety and hazard stickers 10
3. Movement and unpacking 10
4. Installation 11
4.1. Choice of installation position for the main central vacuum unit 11
4.2. Installation of the BEAM Commercial central vacuum unit 11
4.3. Electrical connections 11
5. Use and operation 12
5.1. Switching on rst time 12
5.2. Operation instructions 13
5.3. Final system test 13
5.4. Operation of the inverter on the control panel 13
5.5. Operation of the self-cleaning system 14
6. Maintenance 14
6.1. Routine maintenance 14
6.2. Replacement of dust collection bag 15
6.3. Replacement of the lter cartridge (lter) 15
6.4. Cleaning of the lter cartridge (lter) 16
6.5. Non-routine maintenance 16
7. Problems, causes and remedies 17
8. End of service and decommissioning 18
9. Information to be kept 18