User's Manual

Terra400 & Oceana400 - Installation & User Manual
25
Types of Tones on RJ11/POTS
TYPE OF TONE SOUND DESCRIPTION
Dial Tone Continuous tone Telephone ready for use
Progress Tone Continuous short beep, with
3 second interval
Number has been dialled but
call has yet to connect.
Unavailable Tone Beeping tone (engaged) Phone is not registered, or no
signal. Calls cannot be made
SIM PIN Required TBC A simpin is required to be
entered
SIM PUK Required TBC A PUK code is required to be
entered
Phone o-hook Fast ascending tone,
repeating.
Phone has been left ohook
for > 15 seconds and is not
in a call.
Error Codes
When the signal LED is cycling between GREEN, YELLOW, and RED:
CALL LED MESSAGE LED DESCRIPTION/ERROR CODE
GREEN GREEN SIM PIN required
GREEN OFF Insert SIM card
OFF GREEN PUK code required
RED
RED Fail to communicate with core module
RED
OFF GPS antenna power error
OFF
RED SAT antenna power error
RED
GREEN SIM locked. Contact Service provider
GREEN
RED System error
Special Modes of Operation
Firmware Upgrade Mode
• In rmware upgrade mode all LED’s will ash RED.
Transceiver (USB Bridge) Mode
• In this mode all LED’s will ash GREEN.