User's Manual

3) Wall Mounting Orientation

There are two mounting holes at the back of the

terminal (as shown, shaded, in the below image).

The distance (from centre to centre) between the

mounting holes is 10 cm. You are required to use

the included two mounting screws (as shown

below) on the wall which will securely mount the

terminal on the wall in a vertical position.

10cm

NOTE

Vertical (wall) mounting orientation is required to

maintain IP53 rain protection.

Optional through-wall

Right angled adapters are optionally tted to the

external antenna connectors to allow routing of

cables through a wall. A “clean” installation free of

any visible cabling can be achieved with the use of

right angled connectors .

SMA Adaptor (GPS)

TNC Adaptor (GSPS)

<60°

MOUTING

SCREWS

~4mm