User's Manual

Terra400 & Oceana400 - Installation & User Manual
17
2) SIM Installation
If your Service Provider has not installed the SIM
card for you, follow these steps to install.
1. Turn power OFF to the Terminal. Failure to
turn OFF can result in corruption of your
SIM card memory.
2. Release the SIM cover by unlatching the
latch with your nger or thumb. The SIM
Cover is shown highlighted below.
3. Slide the tray guide of the SIM connector
into the Open position.
4. Raise the SIM tray as shown below to have
access to insert the SIM card.
5. Gently insert the SIM card into the
tray slots making sure that the golden
connectors are facing downwards.
6. Lower the tray and slide the tray guide into
the lock position.
7. Replace the SIM cover.