User's Manual

23 | P a g e
CONFIGURATION & SETTINGS
USER CONTROL/RESTRICTIONS
Some features of the Thuraya WE can be configured by the Administrator to require a password to
use. The default password is ‘password’. These include:
• Making and receiving calls
• Sending and receiving SMS’s
• Access to the Internet
Passwords are saved in the users smart device.
DASHBOARD
WE Service Restrictions
Cellular Data
Enable or Disable Cellular Data
Satellite Data
Enable or Disable Satellite Data
SETTINGS
Allows the end user to configure the Thuraya WE App and the device settings.
App Settings (Available on the WE APP Only)
App settings can be changed at any time and relate only to the current smart device.
Smart Dialling
When enabled it will automatically apply to contact numbers without an international prefix.
Clear Passwords
This will remove all saved passwords on the smart device.
Help
Help and usage guide
About
Version and legal information
Device Settings
Refers to the Thuraya WE device settings available on The WE App and Web Portal
Audible Alerts
Set the volume or turn off the sounds for alerts.
Automatic S.A.P.A
The automatic Satellite Antenna Pointing Assistance (S.A.P.A) can be enabled or disabled.
GNSS Configuration
Set the preferred and secondary GNSS services.
Power
Restart or turn off the Thuraya WE device.
Recent Call Logs
View the history of calls made, received and missed.
Logs
This is a file where events that occur in the Thuraya WE are recorded. This file may be requested for
troubleshooting.
Commented [JZ4]: Added this section as it was not
mentioned anywhere in the user manual.