Manualshelf

User Manual

ManualsBrandsBeagleBoard Manuals32 Bit MicrocontrollersBeagleBoard BeagleBone Black Development Platform
81828384858687888990
7.3 USB Client
The USB Client connector is accessible on the bottom side of the board under the row of
four LEDs as shown in
Figure 52
. It uses a 5 pin miniUSB cable, the same as is used on
the original BeagleBone. The cable is provided with the board. The cable can also be
used to power the board.
Figure 52 USB Client Connector
This port is a USB Client only interface and is intended for connection to a PC.
USB Client
Connector