Manualshelf

User Manual

ManualsBrandsBeagleBoard Manuals32 Bit MicrocontrollersBeagleBoard BeagleBone Black Development Platform
21222324252627282930
element14 is a trademark of Premier Farnell plc 21
© 2014 Premier Farnell plc. All Rights Reserved
Figure 12 Ethernet Cable Connection
Apply Power
The final step is to plug in the DC power supply to the DC power jack as shown in
Figure
13
below.
Figure 13 External DC Power
5. The cable needed to connect to your display is a microHDMI to HDMI. Connect the
microHDMI connector end to the board at this time. The connector is on the bottom
side of the board as shown in
Figure 14
below.