Manualshelf

User Manual

ManualsBrandsBeagleBoard Manuals32 Bit MicrocontrollersBeagleBoard BeagleBone Black Development Platform
11121314151617181920
Figure 10
Connect Keyboard and Mouse Receiver to the Board
If you have a wired USB keyboard requiring two USB ports, you will need a HUB similar to
the ones shown in
Figure 11
. You may want to have more than one port for other devices.
Note that the board can only supply up to 500mA, so if you plan to load it down, it will need
to be externally powered.
4. Connect the Ethernet Cable
If you decide you want to connect to your local area network, an Ethernet cable can be
used. Connect the Ethernet Cable to the Ethernet port as shown in
Figure 12
. Any
standard 100M Ethernet cable should work.
Figure 11 Keyboard and Mouse Hubs