User manual
S400 11EN
Charging the battery:
TherearetwowaysofS200/S210batterycharging:
A. Desktop charging
B. Travel charging
The lithium battery of the mobile phone can be
immediately used after unpacking. A new battery, is
not fully charged, and performs best after performing
a full charge/discharge 3 times:
1. Plug the charger into the charger connector.
2. Plug the other end into an electrical outlet.
3. The phone may need several hours for reaching a
fully charge.
When your phone is power off, it might take a few
seconds to show charging display and it shows charge
complete when finished.
When your phone is power on, the battery icon flickers
when it starting charging and become still with full
bars in battery icon when finished.
Note: Charge the battery for at least 10 hours before using the
phone for the first time.
Switching the telephone on or off:
Make sure that you SIM card is in your mobile phone
and that the battery is charged.
1. Press the End key to switch the phone on.
2. If you have entered a PIN-code before, the phone
will ask for the code now. Enter the PIN-code and
confirm by pressing OK.
3. Choose your language and press OK.
4. To turn off your phone, press and hold the End key
for two seconds.
Getting started