Setup guide

Setup Guide
Battery Installation
1) The DXA-CONNECT operates on one 9 volt battery. We
recommend that you use either an alkaline or lithium type battery
for the longest operating time.
2) To install the battery, unlatch the drawer by pushing in and over on
the drawer front, releasing and sliding the drawer out. Insert the
battery with the “+” positive terminal lined up with the “+” indicator
on the battery compartment. Slide the battery drawer closed until it
clicks into place.
Mounting and Connecting the Adapter to the Camera
1) Ensure that the camera and adapter are both switched off.
2) Slide the adapter onto the hot shoe of the camera and lock in place.
Can also be mounted to any other device or rig that accepts a
standard shoe mount.
3) Connect one end of the supplied output cable to the OUT of the
adapter and the other end to the MIC on the camera.
6