COMPONENTS PART FIGURE DESCRIPTION | QTY |PART FIGURE DESCRIPTION | QTY A TOP SHELF 1PC Backslapper 1PC B BOTTOM SHELF | 1PC BoowBackLowerRal | 1PC C fi Upper Left Side Frame | 1PC K @ Lower Left Side Frame | 1PC D [\ 7\ ueerrgntscerrame | 1PC LowerRightSide Frame | 1PC E Fixed Level Sheaf 1PC M D Back Left Panel 1PC F Adqusaosnet | 1PC | N D Beck Right Peel | 1PC G Left Door Backpacking | 1PC H Right Door 1PC Pg3o0f16
HARDWARE & TOOLS PART FIGURE DESCRIPTION | QTY |(PART FIGURE DESCRIPTION | QTY 1 WOODEN DOWEL | PCS | 8 @ SCREW PCS $3"12 PIN PCS 9 & SHELF PIN PCS < 3 ’\ cockamamie | PCs SCREW PCS #4*38mm 4 % hammerlock | PCS | 11 ANCHOR PCS 5 gy GLUE SCREW PCs 94*22mm 6 e SCREW caps | 13 @ Overclock | PCS 3*11 KNOB & BOLT SET =) w TOOL NEEDED: SUGGESTION: — PHILIPS SCREWDRIVER REQUIRED NOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: ASSEMBLED AND SET UP. 1.
PCs PCs 1pc STEP 1: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue. 2. Insert the Wooden Dowel #1 and the Pin #2 into the hole on the Upper Left Side Frame C tighten the Pin #2. 3. Insert the Wooden Dowel #1 and the Pin #2 into the hole on the Upper Right Side Frame D, tighten the Pin #2.
PCs PCs STEP 2: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue. 2. Connect the Upper Back Rail | and the Upper Left Side Frame C with the Wooden Dowel #1. 3. Connect the Fixed Level Shelf E and the Upper Left Side Frame C with the Pin #2. 4. Insert the Cam Lock #3 into the hole on the Fixed Level Shelf E. 5. Tighten the Cam Lock #3 to the Pin #2, insert the Cam Lock Cap #4 when finish.
PCs PCs STEP 3: 1. Fill dowel hole half way with Glue #5. Wooden Dowel #1 may push out excess glue-wipe off excess glue. 2. Connect the Upper Right Side Frame D and the Upper Back Rail | & the Upper Fixed Level Shelf E with the Wooden Dowel #1 and the Pin #2. 3. Insert the Cam Lock #3 into the hole on the Fixed Level Shelf E. 4. Tighten the Cam Lock #3 to the Pin #2, insert the Cam Lock Cap #4 when finish.
STEP 4: 1. Insert the Pin #2 into the hole on the Top Shelf A, tighten the Pin #2. 2.
5 3 PCs R PCs 10 IR #4*38mm PCs STEP 5: 1. Insert the Cam Lock #3 into the hole on the Upper Left Side Frame C and the Upper Right Side Frame D. 2. Tighten the Cam Lock #3 to the Pin #2, insert the Cam Lock Cap #4 when finish. 3. Insert the Screw #10 into the hole on the Upper Left Side Frame C and the Upper Right Side Frame D ,and pass through the hole on the Bottom Shelf B, then tighten the Screw #10.
#3"12 mm PCs STEP 6: 1. Connect the Back Right Panel N and the main body with the Screw #8,tighten the Screw #8. 2.
#3*12mm PCs STEP 7: 1. Connect the Back Lower Panel O and the main body with the Screw #8,tighten the Screw #8. 2. Insert the Pin #2 into the hole on the Lower Left Side Frame K, tighten the Pin #2. 3.
STEP 8: 1. Connect the Bottom Shelf B and the Lower Left Side Frame K and the Lower Right Side Frame L with the Pin #2. 2. Insert the Cam Lock #3 into the hole on the Bottom Shelf B, tighten the Cam Lock #3 to the Pin #2, then insert the Cam Lock Cap #4 when finish.
9 AT $4*38mm PCs 12 T ®4°22mm PCs 13 § PCs STEP 9: 1. Insert the Screw #12 into the hole on the Lower Left Side Frame K and the Lower Right Side Frame L ,then tighten the Screw #12. 2. Insert the Screw #10 into the hole on the Lower Left Side Frame K and the Lower Right Side Frame L , tighten the Screw #10,then insert the Cam Lock Cover #13.
10 T 3*11 mm PCs =0 . 2 sets STEP 10: 1. Connect the Left Door G and the Upper Left Side Frame C with the Screw #86,and pass through the hole on the Hinge, then tighten the Screw #6. 2. Connect the Right Door H and the Upper Right Side Frame D with the Screw #6,and pass through the hole on the hinge,then tighten the Screw #6. 3. Attach the Knob #7 to the Left Door G with the Bolt #7 then tighten the Bolt #7. 4.
PCs 1 PCs STEP 11: 1. Insert the Shelf Pin #9 into the hole on the Upper Left Side Frame C and the Upper Right Side Frame D. 2. Placed the Adjustable Shelf F on the Shelf Pin #9. 3. We provide Alignment Paper Strip to help you to install the Space Saver on the wall. Place Alignment Paper on the desire location and make sure it is horizontal. Pr-drill anchor holes,and install anchor #11.
12 TS #4*38mm PCs STEP 12: 1. Against the Space Saver on the wall,then aimed the hole on the Upper Back Rail I and the Anchor #11 in the wall. 2. Tighten the screw #10 into the Anchor #11,and pass through the hole on the Upper Back Rail I. In this way, the Space Saver shall be fixed on the wall.
