Installation & Assembly

Turn on the power at fuse or circuit box
Fig. 1
Outlet Box
Support Brace
Canopy
Coupling Kit
5. Attach the fixture canopy to the mounting strap (A) by inserting
the fixture mounting screws (D), then secure it with two ball nuts (F).
6. Attach the glass shade onto the socket and tighten the glass shade
with the socket ring.
7. Install a bulb (not included).
Check relamping label at socket area or packaging for maximum
allowed wattage.
8. Angled mounting recommended for a vaulted or angled ceiling.
(See Fig.1)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
6154MM (1 SET)
12”Rod
3213RD (3PCS)
6”Rod
3214RD(1PC)
3”Rod
3215RD (1PC)
Glass Shade
9851CB (1PC)
Mounting Strap (A)
Mounting Screw (B) Wire Connector (C)
Fixture Mounting Screw (D)
Lock Nut (E) Ball Nut (F)
A: 5-1/4"
B: 10-1/4"~55-1/4"