Assembly & Installation Instructions

House Grounding Wire

Green Grounding Screw E()

Fixture Grounding Wire

Back Plate

Ball Nut G()

Glass Holder

Mounting Screw B

Mounting Plate A

()

Outlet Box

Fixture Wire

Lock Nut F()

Headless Screw D()

Socket Ring

Glass Shade

Type A Max 60 W.

or ST Vintage Bulb

INSTRUCTIONS

NOTES 1 Before installing consult local electrical codes for wiring and grounding requirements:. , .

2. READ AND SAVE THESE INSTRUCTIONS.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK BE SURE TO SHUT OFF,

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Green Grounding

Screw E()

Headless

screw D()

Mounting Screw( )B

Wire Connector(C)

Lock Nut F()

Mounting plate A()

Ball Nut G()

ASSEMBLY AND INSTALLATION

Hardware Package (included):

Installation Steps

Wire Connector(C)

(not included)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK,BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES:1.Before installing,consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1.Thread two headless screws through the mounting plate,then secure them with four lock nuts (two on each side of the mounting plate). Adjust the length of the headless screws if necessary. Note: Make sure that the headless screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the mounting plate to the outlet box by using two mounting screws. 3. Pull out the source wires from the outlet box.