Owner Manual

Step 1

6 of 11

The best place to assemble this arm Bench is on a flat surface, eg., floor.

Position Parts Backrest (A) and Seat Panel (C) as shown in picture above.

Affix 1st Right Arm Panel (B1) ( facing skywards ), as shown above.

Attach Arm Panel(B1) and Backrest Panel(A) by using 1 Screw(②)+Allen

Key(④)

Attach Arm Panel(B1) and Seat Panel(C) by using 2 Screws(①)+Allen Key(④)

Then, flip chair to rest on 1st Arm(B1) so that 2nd Arm (B2) is now facing

skywards.

Repeat the same process by affixing Screws to designated points.

CAUTION: DO NOT TIGHTEN SCREWS