HARDWARE LIST $1/4" $8x30mm Long Bolt Short Bolt Spring Washers Flat Washer Wood Dowel 6 PCS 8 PCS 14 PCS (Extra 1) | 14 PCS (Extra 1) | 16 PCS (Extra $3x14mm $3x14mm $5/32x15mm Spring Hinge Round Head Flat Head Screw Handle Round Head Bolt Screw 1 PC 4 PCS 6 PCS PCS 4 PCS $3x14mm Screw Adhesive Pads Allen Wrench 16 PCS (Extra 1) PCS 1PC ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly. / Phillips Head Screwdriver Note: Wood dowels are intended for alignment.
Step 1. Attach upper panel (part D) to left panel (part B) using wood dowels (part #5), short bolts (part #2), spring washers (part #3), flat washers (part #4) and Allen wrench (part #13). Step 2. Attach right panel (part C) to upper panel (part D) using wood dowels (part #5), short bolts (part #2), spring washers (part #3), flat washers (part #4) and Allen wrench (part #13).
Step 3. Attach assembled unit (parts front panel (part G) using wood dowels (part #5), short bolts (part #2), spring washers (part #3) flat washers (part #4) and Allen wrench (part #13). #131x1 Step 4. Attach bottom panel (part F) to assembled unit (parts using wood dowels (part #5), long bolts (part #1), spring washers (part #3), flat washers (part #4) and Allen wrench (part #13).
Step 5. Attach back panel (part E) to assembled unit (parts using screws (part #11) and fillips head screwdriver. #1100 X16 Step 6. Using hinges attach top panel (part A) to upper panel (part D) using flat head screws (part #8) and fillips head screwdriver. Attach spring hinge (part #6) to top panel (part A) using round head screws {part #7) and fillips head screwdriver. Attach handles (part #9) to front panel (part G) using round head bolts (part #10) and fillips head screwdriver.
Step 7. Carefully turn unit upright. Attach spring hinge (part #6) to left panel (part B) using round head screws (part #7) and fillips head screwdriver. Attach adhesive pads (part #12) into front panel (part G).
