Installation & Assembly

Page 5 OF 10
Step 3
With assistance from your adult partner, carefully stand the Table up.
Exert pressure floorwards, onto the Table with both your hands.
This pressure will help the Legs and Table Top reach full alignment
status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten Bolts in a sequential manner,
until evenly secured.
When tightening Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next one.
If there are still wobbles, loosen Bolts and excute the same above
process.
If the Table is not Stable, it could lead to damage to the product.
Your Table is ready for use.
This Table can only be used on a flat, level surface.