Assembly Instructions

Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Short bolt
(M6x40mm)
3 2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4
4
Flat washer
(6.5x19mm)
11
5
Screw
(M4x35mm)
8 6
Allen key
(4x80mm)
1
7
Lock washer
(6.5x11mm)
11
STEP 1
Attach seat frame (B) to back (A) with bolts (3) and (1), washers (4) and (7) as shown below. Tighten
with allen key (6).
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.