Assembly Instructions

- 4 -

STEP 1

1. Put the top board (1) upside down on a soft padded surface.

2. Attach the back cross bar (4) to the top board (1) by inserting 2 wood screws (B) through the

holes on the back cross bar (4). Then tighten to the top board (1) by using a Philips screwdriver.

3. Repeat the above step to assemble the front cross bar (5).

STEP 2

1. Attach the top board (1) to 1 side frame (2) by inserting 2 long wood screws (A) through the

holes on the side frame (2) then tighten to the back cross bar (4) and the front cross bar (5) by

using the Allen wrench (F).

2. Attach 1 shelf (3) to the side frame (2) by inserting 2 long wood screws (A) through the holes on

the side frame (2). Then tighten to the shelf (3) by using the Allen wrench (F).

3. Repeat the above step to assemble the other 2 shelves (3).