Assembly Instructions

STEP 1
1. Put the top board (1) upside down on a soft padded surface.
2. Attach the back cross bar (4) to the top board (1) by inserting 2 wood screws (B)
through the holes on the back cross bar (4) then tighten to the top board (1) by
using a Philips screwdriver.
3. Repeat the above step to assemble the front cross bar (5).
STEP 2
1. Attach 2pc Shelf (3) to 1 side frame (2) by inserting 4 long wood screws (A) through the
holes on the side frame (2) then tighten to the shelf (3) by using the Allen wrench (F).
2. Attach 2pc shelf (3) to the other side frame (2) by inserting 4 long wood screws (A)
through the holes on the side frame (2) then tighten to the shelf (3) by using the Allen
wrench (F).