Installation & Assembly

ASSEMBLY INSTRUCTION
NOTE: Please consult a qualified electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Fasten the mounting strap onto the outlet box by using provided 2 outlet box screws.
3. Screw the tube C into the nipple, screw the tube B into the nipple C, screw the tube A into the nipple B,
screw the nipple A into the bushing.
4. Tie the ground wires from fixture and from outlet box to the ground screw on the mounting strap.
Connect the white wire from the fixture to the white wire (neutral wire) from the supply circuit. Connect
the black wire from the fixture to the black wire (live wire) from the supply circuit. Cover the
connections using provided wire connectors. Position wires back inside outlet box.
5. Place the canopy to the outlet box by aligning the protruding mounting screws all the way through the
canopy and tighten the fixture using lock nuts provided until fixture body is held firmly.
6. Unscrew the socket ring from socket. Place the shade over the socket, refasten the socket ring to secure
them.
7. Install the bulb (Included). Turn on the power.