Assembly Instructions

ASSEMBLY INSTRUCTIONS

READY

Adult Assembly

Step 1

Step 2

Attach the legs (2)(3) to headboard panel (1),

using JCB (A) and barrel nut (C).

Tighten with the Allen wrench (G).

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB, BARREL NUT, SPLIT OR FLAT WASHER ARE DAMAGED DURING ASSEMBLY.

BACK VIEW

Attach bed frame assembly to the headboard assembly,

using JCB M6 X 70mm (B) and barrel nut (C) as shown.

Tighten with Allen wrench (G). For slat kit assembly,

follow instructions included with slat kit.

TWIN > FULL > QUEEN > KING

PARTS LIST HARDWARE

Barrel Nut - 8 pcs

Split Washer - 4 pcs

Flat Washer - 4 pcs

JCB M6 X 25mm(1”) - 4 pcs

Spare - 1 pc

JCB M6 X 70mm(2 3/4”) - 4 pcs

JCB M6 X 110mm(3 3/8”) - 4 pcs

Spare - 1 pc

HEADBOARD PANEL 1 PC

1 PC

LEFT LEG

RIGHT LEG

Allen Wrench - 1pc

Spare - 1pc

Before assembling your Headboard, please read through these

instructions carefully. Familiarize yourself with the different parts.

HEADBOARD

Headboard

Page 1 of 2

PAGE 1
READY HEADBOARD ASSEMBLY INSTRUCTIONS Before assembling your Headboard, please read through these instructions carefully. Familiarize yourself with the different parts.
PAGE 2
READY HEADBOARD attach to metal frame sold separately ASSEMBLY INSTRUCTIONS Before assembling your Headboard, please read through these instructions carefully and familiarize yourself with the different parts. Instructions apply for all sizes of bed Twin > Full > Queen > King PARTS LIST Adult Assembly 01 HARDWARE 02 HEADBOARD Attach the headboard assembly (02) to the metal frame as shown below. Using JCB (F) and flat, split washer (E)(D) tighten with Allen wrench (G).