Operating instructions

USER EDIT MENU

This feature is only available on 700 Series tubs that have the

Smart Sense Manager remote installed.

There are three selections in the User Edit Menu

Suppress Reminders. This SST2 system will display a

number of reminders prompting you to perform certain

maintenance tasks. If you do not want these reminders to

be displayed you can suppress them.

Temperature Display. You can change your temperature

read out from Fahrenheit to Celsius.

You can change the time clock display from 12 hour am/

pm to 24 hour Military.

ACCESSING THE USER EDIT MENU

Press the then 1,then , USr will be

displayed. Then press 1 to display Sr.n (Suppress

reminders). To suppress press 1 again to make the n

ﬂash. Press to change the n to a Y and then press

1 to conﬁrm, then button twice to exit. Reminders will now

be removed.

If you want to change the temp display from Fahrenheit to

Celsius use the same procedure as above to get to Sr.n but

then press to go to tc.n then 1 to make the n

ﬂash, to change the n to Y and then 1 to conﬁrm.

If you want to change the time display from am/pm to 24 use

the same procedures as above to get to Sr.n and then press

twice to get to 24.n then press 1 to get the n to

ﬂash, press to change the n to Y and then 1 to

conﬁrm then twice to exit.