Technical data

11 Configuring Network Resources
11-12 Creating and Configuring WebLogic Server Domains
! For each channel you want to use in the cluster, configure the channel
identically, including its name, on each Managed Server in the cluster.
! Make sure that the Listen Port and SSL Listen Port you define for each Managed
Server’s channel are different than the Managed Server’s default listen ports. If
the custom channel specifies the same port as a Managed Server’s default port,
the custom channel and the Managed Server’s default channel will each try to
bind to the same port, and you will be unable to start the Managed Server.
! If a Cluster Address has been configured for the cluster, it will be appear in the
Cluster Address field on the Server-->Protocols-->Network
Channel-->Configuration tab. If a Cluster Address has not been configured,
supply it when configuring the Channel. The Network Channel requires a cluster
address to generate EJB handles and failover addresses for use with the cluster.
for information on cluster addressing, see “Cluster Address” in Using WebLogic
Clusters.