User`s guide

Page 12 of 12 75.5753.02 LZR-MICROSCAN 20140107
24/7 Technical Support:
1-800-407-4545
Customer Service:
1-800-523-2462
General Technical Questions:
[e-mail]
Technical Documentation:
www.beasensors.com
Upon completion of the installation or service work, at a minimum, perform a daily safety check in accordance with the
minimum inspection guidelines provided by AAADM. Provide each equipment owner with an owner’s manual that
includes a daily safety checklist and contains, at a minimum, the information recommended by AAADM. Offer an
information session with the equipment owner explaining how to perform daily inspections and point out the location of
power/operation switches to disable the equipment if a compliance issue is noted. The equipment should be inspected
annually in accordance with the minimum inspection guidelines. A safety check that includes, at a minimum, the items
listed on the safety information label must be performed during each service call. If you are not an AAADM certified
inspector, BEA strongly recommends you have an AAADM certified inspector perform an AAADM inspection and place
a valid inspection sticker below the safety information label prior to putting the equipment into operation.
AAADM
American Association of
Automatic Door Manufactures
ANSI / AAADM Compliance
Technology: laser, time-of-flight measurement
Detection mode: presence
Max. door width: 48”
Mounting Height: 6’ 7” - 8’ 2” (for greater heights contact Tech Support)
Remission factor: > 2%
Angular resolution: 2.56 °
Testbody: 28” (H) x 12” (W) x 8” (D) according to UL325
Emission characteristics:
IR laser: wavelength 905 nm; max. output pulse power 35 W (CLASS 1)
Supply Voltage: 12-24 VAC +/-5% / 12-30 VDC +/- 10% (15 W Class II)
Power Consumption: 15 W maximum
Response time: typ. 40 ms; max. 80 ms
Output: 4 electro-mechanic relays (galvanic isolated - polarity free)
Input: 2 optocouplers (galvanic isolated - polarity free)
Test Input *: 8-15 VDC
Temperature Range: -13 °F to +121 °F (-25 °C to +55 °C)
Degree of Protection: Hub - IP20/NEMA 1 Sensor - IP53/NEMA 3
Humidity: 0-95 % non-condensing
Vibrations: < 2 G
Material: PC/ASA
Norm Conformity: EN 60825-1-Eye-safety class 1 IR laser (905 nm), UL325, UL6730
Mounting agnle (rotational): 35° fixed
Tilt angle: 0° to 5° (for angles less than 5° contact Tech Support)
Pollution on front screens: max. 30 %; homogenous
Specifications are subject to change without prior notice.
All values measured in specific conditions.
* SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT
PLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOR PRINTING
©BEA | Original Instructions | 75.5753.02 LZR-MICROSCAN 20140107
TECHNICAL SPECIFICATIONS