BE Professional 1500 PSI (Electric Cold Water) Wall Mount Pressure Washer : Product Manual : Page 35

35

storage

NOTE: Pump Saver is available as an optional accessory. It is not includ-

ed with the pressure washer. Contact the nearest authorized dealer to

purchase Pump Saver.

To use Pump Saver, make sure the pressure washer is turned off and

disconnected from supply water. Read and follow all instructions and

warnings given on the Pump Saver container.

Other Storage Tips

1. DO NOT store fuel from one season to another unless it has been

treated as described in Protect Fuel System.

2. Replace fuel container if it starts to rust. Rust and/or dirt in fuel can

cause problems if it’s used with this unit.

3. Cover unit with a suitable protective cover that does not retain

moisture.

NOTICE

You must protect your unit from freezing temperatures.

• Failure to do so will permanently damage your pump and render your

unit inoperable.

• Freeze damage is not covered under warranty.

WARNING

Storage covers can be flammable.

• DO NOT place a storage cover over a hot pressure washer.

• Let equipment cool for a sufficient time before placing the cover on

the equipment.

4. Store unit in a clean and dry area.